Volume: 142
Issue: December 2012 - January 2013

Classifieds

Advertising in the classifieds is provided to members of the Minnesota Woodworkers Guild free of charge.  Ads placed should be for goods or services of general interest to the woodworkers who make up the guild community.  Ads for services will run until cancelled.  Other ads will run for one issue unless renewed.  Submit ads to Jerry Beutel

Power tool training wanted

I happen to be blind.  I am looking for someone willing to show me the basics of using power tools in woodworking. I am certain this can be done without sight.  I know of other blind woodworkers.  However, I don't want to come up short a few fingers figuring out how that can be done safely.

Mike Hanson@  mhanson@winternet.com  

Tools

Powermatic 6" jointer, Model 54A for sale, $600.  Excellent condition, with extra set of knives.

Jointer is in my shop in Finlayson, MN - about 100 miles north of the Twin Cities.  (Mandatory, free, shop tour part of the purchase!)

Contact: Roger Knudson
320-233-6543
rwknudson@frontiernet.net
25470 Hwy 18
Finlayson, MN 55735

 

 

 

 

 

 

 

-----------------------------------------------------

Woodworking machinery

First 8 items are new, some still in packaging:

1) Woodmaster 37" 3875 drum sander & sand paper $2800
2) Woodmaster db-500 5 hp 6" port, bags & duct work to fill 2  55 gal drums $975
3) Powermatic 66 10" table saw 5 hp upgrade left tilt 50"extension & Powermatic mobile base for saw & extension $1800
4) Delta 2 speed shaper x5 43-431x 3/4 & 1 1/4 spindles & Delta mobile base $1200
5) Delta 3 hp 15" planer x5 22-785 infeed/outfeed tables & Delta mobile base $1050
6) Delta 1hp power feeder 36-851 3 roller 4 speed $900
7) Delta mortiser 14-651 $200
8) Jet jous-10 osillating floor spindle sander 110v $800
9) Delta osillating edge sander 31-396 less than 3 hours use $2000
10) Jet dc 1100rc dust collector 110v  dual 4" ports, remote control, Dust Dog v weave top metal canister filter 110v less than 3 hours use $350
11) Jet 18" bandsaw jwbs-18 1 1/2 hp 110vless than 30 hours use $800
12) Apollo 800sp self contained turbine spray system with Apollo A5010 sprayer less than 10 hours use $600
13) 3/4" Pony bar clamps most are new  $10 piece
14) Central Machinery 34" radial floor drill press 3/4 hp 110v less than 2 hours use $225
15) Central Machinery 2 hp 5mic dust collector( new) $180
16) pallet jack 2000lb used 2x $150
air nailers, many new woodworking gadgets, wood spindles, mouldings, hand rail

joe.kaeder@hotmail.com

-----------------------------------------------------

SHOPSMITH Mark 5 with attached jointer and a speed increaser that I would like to sell. Price $2000.00 or best offer. I also have a SHOPSMITH band saw with power stand for $200.00, a ryobi  surface planer $100.00 and a craftsman radial arm saw $100.00 all immediately available.  
Jerold.hahn@comcast.net

-----------------------------------------------------

 

 

Wood

Hackberry tree:

Standing Hackberry tree trunk for sale.  Approximately 20' tall with diameter about 18 inches.  The tree is straight.  Can send a picture.  I could have the trunk cut down or it could be cut by the buyer.  I have no means of delivering it so would have to be picked up in our Lakeville, MN home.  

tleuma@aol.com

-------------------------------------------------------

Hardwoods for Sale:
Kiln dried, surfaced, straight-lined, 15/16” thick, 3’-5’ lengths, 4” – 11” wide, sold as 500 pound pallets (approx. 150 board feet.
$250 -- Red Oak (approx. $1.67/b.f.)
$275 -- Hard Maple (approx. $1.83/b.f.)
$225 – Poplar (approx $1.50/b.f.)

End Trims, kiln dried, surfaced, straight-lined, 15/16” thick, less than 20” lengths, 4: - 11” wide, sold as 200 pound pallets (approx. 60 board feet).
$50 – Red Oak
$60 – Hard Maple
$40 – Poplar

Contact Phil Ayotte, Northland Forest Products, Inc. Shakopee, MN  612-353-1928

-----------------------------------------------------

Premium Red Oak.  I have the following red oak available (in Minneapolis):

(9) 1X6  16’     
(1) 1X6    11.5’
(1) 1X6    10’
(1) 1X8    16’
(1) 1X8    11’
(2) 1X10  13’
(4) 1X10  12’

$750.00   Call John 612-743-0986

-----------------------------------------------------

Walnut $100.   The main piece is 3.25” x 8.5” x 8.5’ long.  Also included are these smaller pieces: 4 @ 2.75X.75X17 inches,   8@ 1.75X.375X17 inches,  1@  2.75X.375X10 inches,  1@ 2.75X.375X12 inches,  1@ 2.75X.5X10 inches.  All for $100  alans@att.net

-----------------------------------------------------

Red Oak Timbers.  I am a Sawyer, I have recently started to cut up some Red Oak Timbers that have been down for approximately four years.  I'm interested in selling the slabs, they are 1" X 16" X 10'.  If you are interested, you can contact me at: kattermaggie@comcast.net  763-443-2628

-----------------------------------------------------

Veneers and marquetry tools. Variety of marquetry tools(including a press) and veneers for sale. A list of veneers follows: Rosewood burl ,African Mahogany, East African rosewood ,Rosewood ,Premium Walnut ,Olive ash,White Oak, Red Oak,Poplar Birch,Sycamore,Dyed Black, Hare-wood Maple,Walnut,African cherry,Aqua Birdseye,and Dyed green. Any  halfway reasonable offer will be accepted. Private party.   Contact surselyd@msn.com

 

Shop Space

 Shop space at 11490 Hudson blvd Lake Elmo.  Three  2400sq.ft wood working bays availiable in  Lake Elmo off of Manning ave and Interstate 94.  Piping for pressurized air, heavy power, ventilation and an interior drive in so you product will never get wet. Great access to Interstate 94.  The whole complex is either wood working shops or a pallet comany so you never have to worry about running your equipment.  $850. Contact Chad at chad@javaprop.com

-----------------------------------------------------

The Mill is a new educational industrial arts/maker space in Minneapolis, Minnesota that celebrates the do-it-yourself culture and creative communities by providing members with access to tools, equipment and instruction. From woodworking to metalworking and electronics, members of the Mill will work on individual or collaborative projects in a well-stocked, industrial grade fabrication workshop. The Mill offers a unique solution to address the knowledge, space, storage and social constraints of building projects at home.

The Mill is community resource. Beyond its identity as workshop, the specific purpose of the Mill is to encourage technical, scientific and artistic skills through individual projects, social collaboration and education. The Mill is conceived as an infrastructure provider for technical-creative projects. We will also fulfill our role as a community resource by hosting classes in a number of areas including electronics, woodworking, digital fabrication, metal fabrication, artistic use of industrial equipment and any other skills that our members or guests are willing to share.

The mission of the Mill is to serve as an incubator of ideas; to foster a collaborative community where members utilize industrial arts concepts, cutting edge technology and time tested fabrication equipment to create innovative solutions to technical issues in fabrication and making. Through classes, group interaction, and an inclusive environment, the Mill is a space where innovation and creativity can be fostered for novice and expert alike.

www.mnmill.org
The Mill
2300 Kennedy St NE
Suite #130
Minneapolis, MN 55413
 

-----------------------------------------------------

North Country Woodshop – Woodshop Open to the Public.  The easiest way to describe North Country Woodshop would be this: It's a health club for woodworkers. But, instead of treadmills, we have table saws...instead of dumbbells, we have drill presses, lathes, joiners, sanders, and so on. If it belongs in a woodworking shop, North Country Woodshop has it. And the best part, all the tools are available to use with a simple membership to North Country Woodshop.

Have your own hand tools? Bring'em! Don't have your own hand tools? Rent ours. Our staff of veteran woodworkers will show you how to swing that hammer without hurting yourself...or others. If you need lumber for your project, but don't have time to pick it up yourself, give us a call and we will have it waiting for you when you get there. And when your project is done, we can deliver it for you as well.

North Country Woodshop offers a wide variety of classes for all levels of woodworking ability. We offer classes from beginner to advanced with a large variety of projects and techniques. Our classes are taught by our team of expert woodworkers as well as local and world renowned guest instructors. Contact info at North Country Woodshop.

-----------------------------------------------------

 

Services

Mike Siemsen's School of Woodworking.  Woodworking with a hand tool focus.We have a great line up this year including some tool sharpening and tool tuning classes. Our Workbench Class was a huge success and will be offered again in the future. Take a look at my website, improve your sharpening or furniture making skills! Classes are held in my shop on a quiet rural setting 35 miles North of the Twin Cities. The shop is heated and air conditioned for your comfort year around. Reserve your spot now!  Visit my website at www.schoolofwood.com, e-mail mike@schoolofwood.com or call 651-257-9166 for more information.

-----------------------------------------------------

Woodcraft Education Program. Located in Bloomington, we offer the Twin Cities most complete selection ofwoodworking classes. Our classes cover furniture making, carving, turning, hand and power tools, and finishing. We also offer free demonstrations every month.   Close by, small class sizes and the best local and national instructors make it a great place to bring your skills to the next level.  Website:  Woodcraft Bloomington Store    Phone: 952-884-3634

-----------------------------------------------------

Workbench Plans.  Plans now available for Adjustable Height Workbench with a built in Mobile Base.  Email Charlie Kocourek at Charlie@Jack-Bench.com or visit my website www.Jack-Bench.com

-----------------------------------------------------

Plane soles milled flat, price ranges from $12 for a block plane to $40 for a #8. Sides can be milled square to the sole for $15-$20. Contact Chuck Pitschka at 952-935-0660, or by e-mail at cepitschka@yahoo.com

 

Exhibitors Wanted

 

Announcing CAFE: Chicago Art Furniture Expo
Friday, April 19 thru Sunday, April 21, 2013.

The Donald E. Stephens Convention Center
9301 West Bryn Mawr Avenue
Rosemont, Illinois

Chicago Art Furniture Exposition (CAFE) is an exposition of handcrafted and small-run furniture and decorative accents. The show will feature creators of furniture, lamps, mirrors, sculpture, painting, rugs, tableware, and more, who wish to display and sell their products to devotees of handcrafted objects, architects, and interior designers and decorators.

CAFE will also support furniture makers who are just starting their careers with an Emerging Artists area. This section of the show will be open to craftspeople who have been practicing for five or fewer years. The Emerging Artists area will consist of a shared booth. Artists work will need to fit in a 50 square foot space.

To be an exhibitor contact: Paul Segedin at 773-262-6086 or paul@chicagoartfurnitureexpo.com

More information is available at: http://www.ChicagoArtFurnitureExpo.com