Advertising in the classifieds is provided to members of the Minnesota Woodworkers Guild free of charge. Ads placed should be for goods or services of general interest to the woodworkers who make up the guild community. Ads for services will run until cancelled. Other ads will run for one issue unless renewed. Submit ads to Jerry Beutel
SHOPSMITH Mark 5 with attached jointer and a speed increaser that I would like to sell. Price $2000.00 or best offer. I also have a SHOPSMITH band saw with power stand for $200.00, a ryobi surface planer $100.00 and a craftsman radial arm saw $100.00 all immediately available.
Drum sander looking for a new home. Homemade 220V, ~20” head drum sander needs a new home for $50. This works well, I just don’t need it anymore. Please contact Mark Fritsche at email@example.com with inquiries. Photos available on request.
Walnut $100. The main piece is 3.25” x 8.5” x 8.5’ long. Also included are these smaller pieces: 4 @ 2.75X.75X17 inches, 8@ 1.75X.375X17 inches, 1@ 2.75X.375X10 inches, 1@ 2.75X.375X12 inches, 1@ 2.75X.5X10 inches. All for $100 firstname.lastname@example.org
Red Oak Timbers. I am a Sawyer, I have recently started to cut up some Red Oak Timbers that have been down for approximately four years. I'm interested in selling the slabs, they are 1" X 16" X 10'. If you are interested, you can contact me at: email@example.com 763-443-2628
Veneers and marquetry tools. Variety of marquetry tools(including a press) and veneers for sale. A list of veneers follows: Rosewood burl ,African Mahogany, East African rosewood ,Rosewood ,Premium Walnut ,Olive ash,White Oak, Red Oak,Poplar Birch,Sycamore,Dyed Black, Hare-wood Maple,Walnut,African cherry,Aqua Birdseye,and Dyed green. Any halfway reasonable offer will be accepted. Private party. Contact firstname.lastname@example.org
Unfinished hardwood picture frame molding, in lengths. Liquidating my inventory. Beautiful, various woods: cherry, maple, walnut, ash, poplar, birch. Several profiles including floater moulding. Moulding is unfinished and sold by the stick, average length 8 - 10 feet. See profile examples at: https://www.facebook.com/media/set/?set=a.1455897894148.42875.1734387448&l=4c7d9cbea4&type=1 Prices vary depending on wood and profile, start at $1.30/foot. Contact me for more info at: email@example.com
Shop space at 11490 Hudson blvd Lake Elmo. Three 2400sq.ft wood working bays availiable in Lake Elmo off of Manning ave and Interstate 94. Piping for pressurized air, heavy power, ventilation and an interior drive in so you product will never get wet. Great access to Interstate 94. The whole complex is either wood working shops or a pallet comany so you never have to worry about running your equipment. $850. Contact Chad at firstname.lastname@example.org
The Mill is a new educational industrial arts/maker space in Minneapolis, Minnesota that celebrates the do-it-yourself culture and creative communities by providing members with access to tools, equipment and instruction. From woodworking to metalworking and electronics, members of the Mill will work on individual or collaborative projects in a well-stocked, industrial grade fabrication workshop. The Mill offers a unique solution to address the knowledge, space, storage and social constraints of building projects at home.
The Mill is community resource. Beyond its identity as workshop, the specific purpose of the Mill is to encourage technical, scientific and artistic skills through individual projects, social collaboration and education. The Mill is conceived as an infrastructure provider for technical-creative projects. We will also fulfill our role as a community resource by hosting classes in a number of areas including electronics, woodworking, digital fabrication, metal fabrication, artistic use of industrial equipment and any other skills that our members or guests are willing to share.
The mission of the Mill is to serve as an incubator of ideas; to foster a collaborative community where members utilize industrial arts concepts, cutting edge technology and time tested fabrication equipment to create innovative solutions to technical issues in fabrication and making. Through classes, group interaction, and an inclusive environment, the Mill is a space where innovation and creativity can be fostered for novice and expert alike.
2300 Kennedy St NE
Minneapolis, MN 55413
Dream Workshop Space for rent /to share (several areas to pick from): 2303 Kennedy Street NE. 4500 s.f. total shop space. Industrial building with mushroom pillars. 12' high ceilings and concrete floors. 10 hp Quincy air compressor. Heavy power - 3 phase and single phase. Private build/work space. Heat/electricity included. Loading dock. Easy parking. Spray booth available on second floor. Room for your own tools/machines. Internet available. Southern exposure/natural light. Many possibilities for the serious hobbyist or professional. Affordable. No curfew.
Optional use of Altendorf sliding table saw, 10" Unisaw, Holzher edgebander, edge sander, pocket drill, system drills, pallet rack, drill presses, lathe, panel carts, 36" wide steel storage lockers, etc. Private office/drafting table available. Contact: Dale 612.812.5331 for viewing.
North Country Woodshop – Woodshop Open to the Public. The easiest way to describe North Country Woodshop would be this: It's a health club for woodworkers. But, instead of treadmills, we have table saws...instead of dumbbells, we have drill presses, lathes, joiners, sanders, and so on. If it belongs in a woodworking shop, North Country Woodshop has it. And the best part, all the tools are available to use with a simple membership to North Country Woodshop.
Have your own hand tools? Bring'em! Don't have your own hand tools? Rent ours. Our staff of veteran woodworkers will show you how to swing that hammer without hurting yourself...or others. If you need lumber for your project, but don't have time to pick it up yourself, give us a call and we will have it waiting for you when you get there. And when your project is done, we can deliver it for you as well.
North Country Woodshop offers a wide variety of classes for all levels of woodworking ability. We offer classes from beginner to advanced with a large variety of projects and techniques. Our classes are taught by our team of expert woodworkers as well as local and world renowned guest instructors. Contact info at North Country Woodshop.
Space available to rent in Bespoke Minneapolis’/St. Paul workshop. Rental costs include: full use of shop facilities, finishing room, and all utilities and trash. Shop equipment includes Altendorf sliding table saw, Format cnc shaper, Format digital 20” planer, SCM 16” jointer, Laguna cnc lathe, as well as 16” disc sander, belt sander, moulder, router tables, hydraulic veneer 4’ x 8’ cold press; 5’ x 14’ veneer bag press, Laguna 16” capacity re-saw bandsaw, Powermatic 14” bandsaw, drill press, dovetail jigs and etc. Please view our website www.bespokeminneapolis.com to see the type of work which is produced in our shop. Total rent is $925.00 per month.
Mike Siemsen's School of Woodworking. Woodworking with a hand tool focus.We have a great line up this year including some tool sharpening and tool tuning classes. Our Workbench Class was a huge success and will be offered again in the future. Take a look at my website, improve your sharpening or furniture making skills! Classes are held in my shop on a quiet rural setting 35 miles North of the Twin Cities. The shop is heated and air conditioned for your comfort year around. Reserve your spot now! Visit my website at www.schoolofwood.com, e-mail email@example.com or call 651-257-9166 for more information.
Woodcraft Education Program. Located in Bloomington, we offer the Twin Cities most complete selection ofwoodworking classes. Our classes cover furniture making, carving, turning, hand and power tools, and finishing. We also offer free demonstrations every month. Close by, small class sizes and the best local and national instructors make it a great place to bring your skills to the next level. Website: Woodcraft Bloomington Store Phone: 952-884-3634
Plane soles milled flat, price ranges from $12 for a block plane to $40 for a #8. Sides can be milled square to the sole for $15-$20. Contact Chuck Pitschka at 952-935-0660, or by e-mail at firstname.lastname@example.org